Compare Redon
Milling Machines
R-One+ vs Best Mill vs Hybrid vs GTR
Four Redon mills, from a chairside all-in-one to a 3.7 kW, extreme-angle lab mill. Compare axes, tool capacity, wet and dry milling and materials, then talk to a specialist about the one that fits your work.
Redon R-One+, Best Mill, Hybrid and GTR side by side.
Swipe sideways to compare all four mills.
| Model |  Redon R-One+ |  Redon Best Mill |  Redon Hybrid |  Redon GTR |
|---|---|---|---|---|
| Best for | Clinics producing fast, single-visit restorations chairside | Labs needing versatile, high-output milling across many materials | Labs switching between wet and dry work on complex cases | Labs taking on high-value, complex, extreme-angle cases |
| Setting | Chairside | Lab | Lab | Lab |
| Milling axes | 4-axis | 5-axis simultaneous | 5-axis simultaneous | 5-axis simultaneous, -30° to +120° |
| Wet / dry | Built-in water tank, compressor & filtration | Wet & dry | Wet & dry | Wet & dry |
| Tool changer | 7-bur automatic | 24-bur automatic | 12-tool automatic, tool fracture control | 12-tool automatic, Twin Tool Technology |
| Blocks | Multi-block holder, up to 6 blocks | 15-block automatic changer | Ask a specialist | Ask a specialist |
| Spindle | High-speed; ask a specialist | 60,000 RPM | 1.2 kW | 3.7 kW, up to 60,000 RPM |
| Precision | High-performance spindle, four-axis control | Monoblock cast body for stability | 1-micron precision tool sensor, monoblock cast body | Down to 1 micron, advanced tool path control |
| Materials | Zirconium, glass-ceramic, PMMA, composite, wax, PEEK, premill | Zirconium, titanium, CoCr, glass-ceramic, PMMA, wax, premill | Zirconium, titanium, CoCr, glass-ceramic, PMMA, composite, wax, premill | Zirconium, titanium, CoCr, glass-ceramic, PMMA, wax |
| Software | Works with all oral scanners and CAM software | Open CAM software | Open CAM software | Ask a specialist |
| Details | R-One+ details | Best Mill details | Hybrid details | GTR details |
Full specification sheets are linked from each model's page.
Match the mill to the work you do every day.
You mill chairside
You want same-day crowns in the clinic, with water, air and filtration built in and no extra units to install.
You need volume
Your lab runs many units across zirconium, CoCr, titanium and glass-ceramic, and a 24-bur magazine with a 15-block changer keeps it running.
You switch wet and dry
You move between glass-ceramic, zirconium and titanium jobs and want 1-micron accuracy with tool fracture control.
You take on the hardest cases
You mill complex, high-value restorations and need -30° to +120° angles, Twin Tool Technology and a 3.7 kW spindle.
What is the difference between the Redon Hybrid and the GTR?
Both are 5-axis wet and dry lab mills with a 12-tool changer. The GTR adds Twin Tool Technology, a -30° to +120° milling angle range and a 3.7 kW spindle for complex, high-value cases; the Hybrid pairs a 1.2 kW spindle with a 1-micron precision tool sensor and tool fracture control.
Best Mill or Hybrid: which is better for a busy lab?
For sheer throughput, the Best Mill's 24-bur magazine and 15-block changer keep it milling unattended for longer. The Hybrid suits labs that prioritise 1-micron precision and switch often between wet and dry materials.
Which Redon mill is best for chairside dentistry?
The R-One+. It is optimized for chairside, single-visit restorations and comes with its own water tank, compressor and filtration, so it needs no extra units.
Which Redon mills can mill titanium and CoCr?
The Best Mill, Hybrid and GTR all mill titanium and CoCr. The R-One+ focuses on chairside materials such as zirconium, glass-ceramic, PMMA, composite, wax and PEEK.
Where can I buy a Redon mill in the USA?
Every Redon mill on this page is sold in the United States through WTI Dental Concepts, Redon's US distributor. See how buying works on the Buy Redon page, or book an info session.
Still choosing your Redon?
Talk it through.
A Redon specialist can match a mill to your cases, materials and volume, then walk you through buying in the USA.